Uit mijn NAV 2002:
To create Rescue Disks:
Rescue Disks can be created at any time. If you have chosen to create Rescue Disks as a post-install task in the Information Wizard, the Rescue Disk Wizard appears automatically. Otherwise, you can start the Rescue Disk Wizard from the Norton AntiVirus main window.
If you start the Rescue Disk Wizard from the Norton AntiVirus main window, temporarily disable Auto-Protect while you are creating the Rescue Disk set. If you do not restart your computer after creating Rescue Disks, remember to enable Auto-Protect again. If you are creating a Rescue Disk set on floppy disks, you will need five formatted 1.44 MB disks.
1 At the top of the Norton AntiVirus main window, click Rescue.
If you choose to create Rescue Disks on a second physical hard disk, or some other large capacity disk drive, your Rescue Disk set is placed in a folder on the selected disk. Make sure you also have a bootable floppy disk in a safe location. This disk should contain the drivers or other files necessary to start your computer and access the drive on which you placed your Rescue Disk set. Do not create your Rescue Disk set on your C: drive.
2 Select the drive that you want to use to create the Rescue Disk set. To create a floppy disk set, select your A: drive.
3 Click Create.
4 Label the five disks as specified in the Rescue Disk List window and click OK.
5 Insert the disks as requested.
Copyright© 2000-2002 Symantec Corporation. All rights reserved.
Note: Rescue Disks can be made for Windows 98 and Windows Me systems; they are not needed for Windows NT, Window 2000, or Windows XP systems.
